This is a Conversion kit to convert IH hydraulic couplers from the large IH style to the ISO/Pioneer type common on many older units, and now the industry standard on most newer tractors.
This kit includes the new inserts that fit in the original cast housing found on all the 66 series, 86, and 88 series tractors. The original big IH style insert with the release lever is removed, new o-ring seals installed in the original casting and the new pioneer style insert is installed. The casting does not have to be removed from the tractor in order to install this kit. With the conversion complete, the coupler will now accept the small Pioneer style male by just pushing in, even under pressure. No more messing with the release lever or having to push the insert rearward to accept the male end. To couple you just push in, and just pull out to uncouple.This is a Parker/Pioneer brand kit. It comes with everything needed except tools to install. Instructions included. Email if you need help diagnosing your hydraulic problems or if you have questions about this kit.
This kit includes 2 male hoses ends or tips with a choice of 1/2" pipe thread or 7/8" o-ring Boss thread for the male tip. The female coupler conversion cartridges are the same for all IH tractors with this style coupler. The choice offered for this kit is only for the hose thread size of the 2 male tips that will screw onto the hoses of your implement.
Fits IH Tractor models: