--------------------------------------------------
  Loading... Please wait...



Our Newsletter


IH Tractor Pinion Shaft Setting Tool 706 966 1066 986 1086 1456 1466 1486 6588

  • pinion setting tool
  • pinion setting diagram
Price:
$162.00
SKU:
Pinion setting tool
Weight:
4.00 LBS
Shipping:
$16.00 (Fixed shipping cost)
Quantity:


Customer Experiences


Product Description

IH Tractor Pinion shaft setting tool. This tool is used to set the proper depth of the pinon shaft/gear into the differential ring gear. The tool cross bar is set in place in the differetial carrier bores and held in place with the long carrage bolts. The machined plug fits into the end of the pinion gear. There is a setting number engraved in the end of the pinion gear. This number will correspond to the distance that must be obtained (using a shim pack) between the setting tool cross bar and the plug in the end of the pinion gear.There is a chart provided with the tool and also the chart is found in a IH service manual or IT manual. Using this chart with the number on the end of the pinion gear the distance between the tool cross bar and the plug is given. A drawing is provided for a visual explanation. A tip sheet is also included with the tool. This is the exact same tool that the IH service manual says to use when setting the pinion shaft. Without this tool it is nearly impossible to get the pinion depth set correctly. This will work on the following tractors. 706 756 766 786 806 826 856 886 966 986 1026 1066 1086 1206 1256 1456 1466 1468 1486 3088 3288 3388 3488 3588 3788 6388 6588 6788 Hydro100 and Hydro186. This will not work on 15 series tractors. Email if you have any questions.

 

 


Find Similar Products by Category


Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!


Add to Wish List

Click the button below to add the IH Tractor Pinion Shaft Setting Tool 706 966 1066 986 1086 1456 1466 1486 6588 to your wish list.

You Recently Viewed...